The Ciclop 3D scanner is a 100 % open source project. As with all products of the BQ DIY ecosystem, Ciclop and Horus have been released under CC-BY-SA and GPL license. All information on the mechanical design, the electronics and the software have been made freely available to the community, to become part of the Technological Heritage of Humanity.
The aim is not just to study the scanner and understand how it works. We want the community to be involved and to make modifications, improvements and developments using Horus. We are committed to free knowledge and we want to use it to contribute to and drive forward the development of these devices.
The BQ DIY ecosystem expands with Ciclop, the latest addition. Combining it with the Prusa i3 Hephestos or any 3D printer enables you to go one step further and convert the projects that you scan using Ciclop and Horus into tangible objects.
Ciclop is a 3D rotational laser triangulation scanner. It uses 2 lasers projected over an object to capture the geometry and texture as it rotates on a turntable.
Ciclop has been designed with the setup process in mind. The kit includes all the necessary pieces and a step-by-step assembly guide, enabling you to set it up in less than an hour.
The Horus software is a multi-platform application developed by BQ under GPL license. The Horus interface can be used to calibrate the scanner, adjust the camera exposure or view the point clouds generated.
Ciclop interacts with Horus via three workbenches: one to Control the components (camera, lasers, motor and LDR), one for Calibration of the scanner and one for Scanning.
Ciclop is a DIY scanner and, as it is set up manually, the distances and positions of the elements of the final product are different, making it difficult to calibrate the device. This system has been designed to calculate the internal scanner settings automatically using the structure set up by the user, by auto-calibrating correctly. This means that we can guarantee a good result every time you scan.
The ZUM BT-328 board, based on ArduinoTM, includes improvements and better features than other similar boards, which make it the best option for developing electronics projects. ZUM BT-328 executes the control firmware of the motor and the lasers.
ZUM SCAN, a shield derived from Arduino CNC Shield, is connected at the top of the scanner.
Ciclop is focused on the open-source software community, makers, artists and developers that are keen to learn, research, improve and make the most of 3D scanning.
- Fit on almost any printer using M4 threaded holes on 3 sides
- Designed for high speed Filaflex printing. Print Elastic and rigid filaments at high speed without problems. FILAFLEX, PLA, ABS, NYLON, HIPS, PVA, WOOD etc.
- New Recreus hotend design included (1.75 mm) , allows you to reach up to 290°C without any burning of the PTFE liner.
- Compatible with stepper motor NEMA 17-16
- Quick and easy hotend replacement.
- Right and left hand version in the same part for dual extrusion.
- Threaded holes around the main body for cooling fans.
- Solid anodized aluminum CNC milled parts
- Recreus extruder
- 1x 624 bearing
- 1x MK7 drive gear
- 4x M3 allen screw
- 1x 40mm FAN 12v
- 1x Spring
- 1x Recreus Hotend
- 1x 12V heater cartridge
- 1x 100k Thermistor with 2 pin connector.( FOR MARLIN FIRMWARE, USE THERMISTOR Nº 5)